IMG_20200912_130841147_BURST000_COVER_TOP.jpgIMG_20200912_130830074.jpgIMG_20200912_130836562.jpg
This is my first attempt at a double dovetail. Although not perfect, i am happy for a first try. I used a marking gauge and knife for the layout lines, and a dovetail gauge and veritas square for layout. I used a small japanese pull saw for the initial cuts and a coping saw for large waste removal.
One thing i would do differently is to make a relief cut with a chisel to the knife wall instead of relying on the marking lines. I need to find a thinner blade for the coping saw too.
Anyone have any other suggestions?