So I've had this CWI 3hp cyclone ( http://www.cwimachinery.com/product/...ust-collector/ ) for a little less than a year. Its been really great as far as power goes. Its all hardlined with 6" galvanized ducting and I really only use one tool at a time. Yesterday morning I used it for a good hour, turned it off, and when i went to start it back up it gave a go at it but couldn't get up to speed and tripped its little internal circuit on the switch panel. I reset that, and it kept on doing it. For reference its on a 30amp 240V dedicated circuit.
Here's a video link to it: https://www.youtube.com/watch?v=lRsq...ature=youtu.be
Neither of the capacitors smell burnt, nothing in the panel seems fried. I know almost nothing about electrical, so you'll have to forgive my ignorance of the terms etc. Any help would be sorely appreciated, I worked in the shop sans dust collector yesterday and its really awful. Here's some pics of the overall setup:
IMG_7817 copy.jpgIMG_8657 copy.jpgIMG_1742 copy.jpgIMG_2723.jpg