Hey everyone,
First time poster here, Decided to post here because everyone seems very knowledgeable. I have a 30w MOPA laser with an M6 head, When I bought it, it came with EZcad 2.12. There are just a few things I like with 2.14. I found a copy and downloaded it. The machine opened it with no issues and pulled up the correct registration for that machine. First thing that I had noticed, is that the red outline laser did not do anything when F1 was pressed, but it would fire the laser when F2 was pressed. I finally figured out the problem which was only a setting needed changed and now I have everything working, kinda. I was wondering if there is a way to copy all settings from one version to the next version, or at least an easy way to go about doing it. I noticed while testing, that on the new version, the outline was actually off of where it actually lasered the test square. Also it is not talking to the rotary correctly. I tried to go though and made sure that all of the setting were the same, but I feel like I missed something, and could't end up getting it to work properly.
Thanks for your help!
Adam