Solid wood "slab" cabinet doors

[Jim Dwight]

I have done this for some pretty wide drawer fronts but not doors. As long as the client is not super picky I think the risk is probably limited to a door or two that need fixed, max. I think it will work OK.

[Mark Gibney]

Thanks everyone. Turns out a local place I use for drawer boxes, Drees Wood Products, make these doors, and told me they've been doing them for years.
So that makes this job much easier to bid than if I'm trying to figure out the cost of making them myself.
Drees don't give a warranty on these doors however. Don't blame them!

thanks, Mark