I added a dedicated 20 amp circuit after picking up a used HF DC. I installed an upgraded impeller from Rikon so I know power draw will be a bit more than stock, but many on the web have done this same upgrade. Unit runs totally fine EXCEPT if I turn it off, let it spin almost all the way down, and turn back on before it has totally stopped spinning. Blows the 20a breaker. If I turn it off and then back on while it’s still spinning pretty fast, it kicks back on with no problem. Any idea what I can try to fix this? I wear ear protection with music and won’t typically be able to hear that this thing is all the way stopped before turning back on and it takes forever to spin down.
Of course I just spent the last 3 weeks installing this and all the piping. Tons of work so I just want it to work!!
Craig