Julian,
I found a price of $2000 on Alibaba , But I had to buy 10 to get that price.
I will keep looking.
Thank you,
Chuck
Julian,
I found a price of $2000 on Alibaba , But I had to buy 10 to get that price.
I will keep looking.
Thank you,
Chuck
Julian,
I found a price of $2000 on Alibaba , But I had to buy 10 to get that price.
I will keep looking.
Thank you,
Chuck
Chuck,
Check in the SawMill Creek classifieds.
Good luck with your search, Rick
Last edited by Keith Outten; 03-11-2020 at 9:53 AM.
Speak to the company, they sold me just one machine and even arranged air freight to my door.
Shenhui SG350 fitted with a 60w tube.
Aeon Nova 10 100w tube.
Aeon Mira 5030 30w RF tube.
20w Fiber Laser.
50w Fiber Laser.
Located in the Isle of Man, which isn't in the UK but almost surrounded by it.
did U get my PM
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Bill,
thanks for the input.
Could you provide the model number of the one that you’re talking about?
Thanks,
Chuck
Gentlemen,
Recommendations are fine but if you want to purchase or sell please use our Classifieds Forum.
Keith,
I totally understand.
I’m trying to get recommendation on a good machine within a given price range, since there are so many laser engraver’s/cutters out there, I need to narrow it down based on real users experience.
Once I get some firm recommendations I will definitely check the classified area of this forum.
I am mainly interested in a raster engraving machine priced at under $3000. 40 W is plenty of power for any cutting I will be doing on it.
So far I have several recommendations but they were all quite a bit above the $3000 threshold.
Regards,
Chuck