Thomas, you can use a 3/4 dado set. You just have to use a set with the partial plate chippers. See the discussion above. I don't think you can use a 10" one though.
Thomas, you can use a 3/4 dado set. You just have to use a set with the partial plate chippers. See the discussion above. I don't think you can use a 10" one though.
There's a cure for this that might save a few blades as well. Slow the saw down. I put a VFD and a slower motor on my Delta and it works great. It spins the blade at half speed or less. Half speed means 1/4 the energy. Unless you need production rates the slower feed is inconsequential. The quieter saw is nicer to use.