We have an operation that will require a slitting saw type operation with leads, etc.. separating the top off a vertical hollow form. Approximately 500 pieces. Material is wood. We would need about 1.25" of reach and only about 1.25" of cut depth.
I have a couple 1 1/4" shaper arbors for the CNC and could probably have a small diameter (4.5"-6" saw blade) bored to fit, but wondering if anyone knows of a better solution aside from custom tooling?
RPM is a concern. HSD ES919 spindle, 10HP but HP is compromised below about 10K RPM.
Basically what Im hoping for is a small diameter carbide saw blade on an arbor preferably directly to ISO30 taper.
Im considering just running a thin shaper groover in an arbor but the diameter and RPM have me a little concerned based on my spindle.
For reference, Im leaning towards something like this:
https://www.amanatool.com/48200-carb...?ff=1&fp=10950
Thanks.