Scott, if the log is milled at say 8/4, and dried, once the dry but distorted rough boards are milled will they eventually be stable?
Osage when cut starts out a beautiful bright yellow that ages nicely to a dark amber. Google chatoyance.
Typically, with as much tension as is evidenced in that highly off-center pith, unless you are using very short boards (jewelry box range) they tend to move every time they are worked.
I’ve typically only seen piths that far off center on limb wood. Usually there is such a high discard rate when the dried lumber is machined (uup to 80% discard range) that it’s just not financially viable to mill the logs.
We milled one years ago from a massive heirloom tree that grew on a family’s homestead. The trunk was hollow, so the only thing solid was the limb wood (3’ diameter limbs). Even when cut down into 3’ - 4’ lengths, over 2/3 of the total yield was not usable.
I'd split that if it were me, and radially cut it quartersawn afterwards on the bandsaw before it gets harder.
Seal it as soon as you can.
That would be a bit much for a 14" bandsaw though, and worthy of a machine that can handle at least a 3/4" blade (which is properly tensioned)
Might as well go all out and try your hand at some backs and sides, and other bits for acoustic guitars if you end up buying a suitable machine.
That "zoot" or "tonewood" you got is sought after by the luthier community, look on LMI (luthiers mercantile international) to see what those prices are!
Edit: they don't stock any backs and sides anymore.
Lotta work if you don't plan on building an instrument or making thick veneers, but that's what I would do.
It would be a lot more stable if it were not cut the easy or lazy way as some luthiers might think.
Have you got any more bits that might give a hint if the boule you have is figured?
As an aside there is more ways or procuring stock than the Alaskan chainsaw mill, and the Woodmizer type.
Have you seen the Lucas mill?
Tom
Last edited by Tom Trees; 10-07-2019 at 12:23 AM.
A few years ago another guy and myself downed half of a double-trunked, live OO.
I sealed it as each cut was made and still have the majority of it.
But what I think is unusual is that when I got home with the wood I decided I wanted about a 3" thick slab, fairly close to the larger end.
Then I did what I had just heard about at that time..... microwave drying.
The slab fit perfectly. I had to run several 2-3-4 minute cycles until I thought it was dry.
I was just guessing.
Here it is today. The cracks have hardly moved. I had finished it with oil varnish.
I can still see that brilliant yellow sawdust in my mind. As you can see, that didn't last long.
I love OO and I think I might experiment with Epiphanes
No,no !!!
Why not contact a wood turner's club near you. They'd cry if they knew that gorgeous pile of OO would be burned. That's a lot of potentially beautiful pieces.
What Bay area? Is it near Northwest Illinois?
The pic I posted above is much darker brown than in the photo. 4 tungsten lights hang above the table I shot it on, even though I used flash.
That log is perfect for woodturning. Some turn it wet, I turn dry. When I get green osage I cut it into a variety of turning blanks and let it air dry. If you decide not to mill it maybe contact a turning club.
BTW, I also saw osage into sticks for outdoor use. It makes great garden stakes and fence tensioners.
JKJ
Bump: We were out for a post-lunch walk and ran across one of these trees and the wacky fruits.
Erik
4FC77345-ED2F-4FD6-BBC5-C8EC67616A05.jpg24EC3FCD-1C60-43E5-845F-6F9E0A2007D0.jpg
Ex-SCM and Felder rep
It should be illegal to call those fruits.
I disagree with at least one of your statements above. Colorwise, exposure to light/UV darkens Osage Orange, not lighten, as does air exposure, albeit slower if already finished. I've made pieces over a long period dating back to when I left my native KS in 1973(and before) where the tree is common in hedgerows. Many have now been removed as no-till fields came into farming. It's like cherry, it will darken whether you want it to, or not. I have lots of family who happen to live in Osage County, KS and near the Osage river. The Indian's use of the wood, and the tribal name too carry over into geography and such.
As for pockets of soft wood-lots of luck on that one too! HA! It does have grain reversals, mostly small and thus can chip on some spots ( not much more than highly figured Maple except it's much harder-see the scale-it's the hardest NA species) planing, but if you like your planer and it's blades, tiny bites are the only way to do that job.
It has light refraction potential, same as seen in a man's tiger eye cabachon stone. I built an Applachian rocking chair for one of our son's this Christmas from Osage Orange. It has 47" rear posts and a hickory bark bottom with 4 back slats. I normally build a rung style frame using bark fill for my chair backs but in wanting to show off the wood I used 3/8" x 4" boiled & bent slats on this one.
I very slightly lost a bit of color with boiling the slats as the pigment is water soluble but still easily matched the chair. My homes kitchen island built ~ 3 years ago has three stools built from Osage and they have been dark for over a year and will get twice as dark still yet. I like working with osage but my stash is getting smaller and few logs to be had even though I do have a sawmill.
My wood came from Perry County, KS area near Lake Perry there, the sawyer is long gone now as he was old back when. He sawed barn patterns, etc., and had much Osage on hand as he specialized in livestock trailer floors, said he'd never seen one need replaced. It is the old time fence post wood of choice in KS and much of fly over land before steel & treated came in. One of my LR table lamps is made from a large corner post of fence wood.
It will air dry if your patient. I have never bandsawed the wood on my Woodmizer but shouyld cut similar to hickory.
OP-where are you located?
I spotted some huge Osage trees over in the Lexington, KY area on farm edges and intend to ask about them. it looks similar to some locust trees bark wise until you look harder. often a decent trunk has twisted growth. Beware of seriously sharp thorns too!
I grew up in the town of Bois D'Arc MO. Had acres of hedge on the farm. Had fence posts in the ground for nearly 100 years and still solid as the day they were installed. Never tried to do any woodworking with the wood though and now live in Texas so not much supply here.