I am looking to add a tool post for use with my Jet 1642 EVS lathe and either a Monster articulated hollowing system or a Jamieson style captive hollowing system. I have the stock tool rest that came with the lathe and even when it is fully lowered in the banjo, it is too tall to have the tools be on center when using the hollowing systems. This is because of shape of the tool rest which interferes with the banjo (see pic). I have purchased a Robust tool rest previously, a 4 inch one, and that tool post has been too short for regular turning (not hollowing). I would consider a longer Robust tool rest but it would be nice if it could be used either with or without the hollowing systems.
What do others recommend for tool rests for this lathe? There seem to be several options out there but none get very good reviews.
41Y12EV06AL._AC_.jpg