I have some really nice wormy maple that I want to resaw, and don't want to lose anymore than the blade kerf (minimize planing). My stock Kreg fence has worked really good for short height boards, but the maple is 4x that size. My practice cuts on tall scrap have been less than desirable, so I need a better fence.
There appears to be two different fence types for resawing. The first is like Kregs resaw guide with the curved face, or a point fence. The other is just a taller fence.
I'm thinking that each fence type can produce bad cut results due to blade bowing (tall fence) or sloppy feed control (point fence), both resulting in too much wood loss.
What type of fence do you use for tall pieces? Have you tried the other type and found that it didn't work?
TIA.