I thought I would go ahead and start a thread to cover my workshop build. We just built. 70x100 barn and I was “granted” a workshop space of 12x26. This shop will be a combination workspace that will be mostly hand tool focused, but have sheet good/cabinetry capabilities as well as light metal working.
On the end of the shop is a 8x8’ insulated, roll up door and the entrance is through the powder room.
1E334E3C-FB64-4148-BC86-789E164227B8.jpg
The barn is up and this is what the shop looked like initially
B3A07402-FB4D-41F5-9241-B8D4B2058FEA.jpg
To the right is the apartment and the ceilings in the shop are 11-16ft so I will have lumber storage above the apartment.
i did build a small bench to get started with
82B83A67-5DDB-4844-B2DF-9E26688B0BC6.jpg
Last weekend the main focus was to get the power meter and disconnects installed and ready for the power company to inspect. Passed yesterday so we should have power in a couple of weeks.
B56C0E32-9A60-4515-A31A-7764C8A59835.jpg348A9D3A-99BB-420B-AF61-4B26CF9A859F.jpg