Hi guys.
I want to make a small tray, 10x13" and 2 1/2" high. Will join the sides with through dovetails. I want to use 1/4" thick material for the bottom. I want the bottom to ride in a groove on all 4 sides.
No sweat - got out my plow plane and cut a groove on the tail boards. The end of the groove wont show. But if I groove the pin boards all the way to the end, it WILL show. So I tried to cut a stopped groove with the plow - can't get a uniform depth because the skate is longer than the groove.
How do you cut grooves like this?
Thank you.
Fred