My Lovely Bride bumped the glass lid of her favorite coarse salt container off the counter and it didn't survive. She was distressed since she uses this when cooking. I happen to strongly support her incredible cooking so this quick little project should pay big dividends!
Some years ago I had an Eastern Red Cedar log on the sawmill and uncovered this wonderful marbled figure. (This lid is end grain which best shows off the figure.) I was able to reuse the silicone rubber seal from the glass lid.
Now that I see what it looks like I want to try to find some more and break the glass lids! - should make nice gifts.
I used negative rake scrapers and a hand scraper to eliminate most of the sanding except for some 400 to 800 grit. Finish is beeswax melted into the wood with a small heat gun. If interested, I put some photos in this message.