<p>
Hey Guys, So I recenly purchased the Axiom AR8 Pro. I'm pretty new to the CNC world and have been trying to figure a few things out that maybe you can all help me with. Basically, I'm using VCarve Pro. The Spindle speed needs to be set on the machine, not the vcarve program. But for some reason, the Axiom machine also ignores my feed rate. So no matter if I set the feed rate to 5IPM or 200 IPM. It consistantly runs at the same speed. I can't find out where to get this to work. The manual is useless! But otherwise a solid and Impressive little machine. Can anyone help? Thanks,Kirk</p>