I need to have an 8" jointer blanchard ground. I tried shimming the ways but I can't get the beds co-planar.
I found one outfit that can do the job for $525 but the jointer cost only $30 (plus scraping, sanding, painting etc) and it's not worth putting that much money into. It's a no-brand 1980's Taiwanese machine, not some classic American old iron.
The dimensions are 8 3/4" x 63 1/2". Any help welcomed!
thanks, Mark
Screen Shot 2017-11-15 at 8.02.28 AM.jpg
Edit - on the plus side, the 1 1/2 hp 110/240 volt motor works great. So far.