The chipped edges of the cuts are pretty ugly, but the fit seems serviceable enough.
The chipped edges of the cuts are pretty ugly, but the fit seems serviceable enough.
"Anything seems possible when you don't know what you're doing."
Thanks all for the encourage kind words...
Attached you will find the two blades I used for that application: the bigger one for "vertical" cuts and the smaller for the "horizontal" ones. It was done completely at free hand. No guides but the pencil traces. No jigs.
I needed to go slower with the transverse (I named them "horizontal") cuts with the small blade as it was prone to vibrate.
All the best,
Last edited by Osvaldo Cristo; 09-25-2017 at 6:18 PM. Reason: As usual, typo error!