So I want to say thank you to all that answered my post about how you guys clamp pocket holes i got caught up and didnt get back to the post in time to be able to add too what ppl said.
I am not sold that its less work to pocket screw all of those joints compared to mortise and tenon. its really close on time and way less work to clamp 3 clamps then it is to screw 20-30 screws for a faceframe. Added to the fact you have to just hope the joint looks good because its on the side you cant see.
I see a lot of people talking about how glue helps with the pocket holes but u can just snap off that joint with no problem (without the screws)as its end grain to side grain.
That being said is it worth using glue in this joint at all? For me glue has been the hardest part of making a good clamp system because you need to have a flat plate of some kind to get the faces to line up this plate gets covered in glue after every joint . I would love to know what all of you people think thanks I really learn so much from all of you out there thanks again.