Hi All,
I'm in the market for a new air filtration system. I currently own a Delta 1/8HP air filter, which needs to be replaced. This is for a 400 sq ft shop. Any suggestions welcome.
John
Hi All,
I'm in the market for a new air filtration system. I currently own a Delta 1/8HP air filter, which needs to be replaced. This is for a 400 sq ft shop. Any suggestions welcome.
John
They all do just about the same thing. I found a Powermatic PM1200 on sale for slightly less than the price of the similar sized JET. I believe that it has a better controller. It has 3 speeds and a timer that can be set to shut off after 1 to 9 hours. I usually use low speed because it is slightly quieter, and only set the timer for 1 hour after I leave the shop, so maybe any brand with a timer would work just as well.
Steve
The Jet is by far the most popular and there are many deals out there on it. It can be had for much less than retail and is pretty much the tried and true option.
If at first you don't succeed, redefine success!
My shop is 720 sq. ft. I installed 2 of the Jets pointing in opposite directions so they move the air around the room in a CCW direction as viewed when standing between them.
Ken
So much to learn, so little time.....
Can anyone tell me whether the outer filter can be had at the local hardware store? I know I was able to find one for my Delta. thx john
Thanks to all for the info. I went ahead and ordered the JET AFS-1000B - 3 speeds, plus timer.
In order to cut costs, I bought 6 MERV 14 furnace filters through Amazon (.ca) for $107 CAD. Not much gets through to the fragile second filter. I find this to be good bang for the buck.
Mike
I bought two of the Wen units from Amazon. Very happy with them, will be getting another.