Hi All
Looking for advice/experience on slowing a 14" Delta Bandsaw (Model 28-276 w/ 56 frame, 110v, 3/4 hp motor) for resawing. It's an early 90's model single pulley no riser block (yet). My plan was to just buy and swap 2-step pulleys from the -206 (sister) model but they are no longer available. Right now it runs at about 3,500fpm I think I need down to 2,000-2,500 for a 3/4" 3TPI blade.
Any thoughts, comments, guidance, or direction - other than "Buy a bigger saw" ;-)
Thx