I'm attempting to recreate this table: http://itzfurniture.com/en/product/mesa-ban/
I modeled it in sketchup and dimensioned the pieces based on the proportions of the table in the picture. The table is held together by joinery alone (angled bridle joints).
I made one modification to the original design of the table legs, which features only one taper: I made additional tapers (one on each side of each table leg).
The profile of the base of the leg is square 1"x1".
Everything will be made from 2x4's. The top is made from 2x4's edged-glued with final dimensions: 26"x84". I'm guessing the table will weigh around 100 lb and I expect the
table to carry around 250lb. I'm not sure if the additional tapers will weaken the base!
Here's how the joints come together:
Ban Table Assembled.jpg
Backside view of a leg (left = original, right = with additional 2 tapers):
Legs_back.PNG
Oblique view:
Legs_obliq.PNG
Side view:
Legs_Side.PNG