Chance, you can call Grizzly, or go online and get a riser kit for that G0555LX bandsaw. They have several kits, but one specifically for that saw. The upper arm on that saw has geared lift and lowering with a knob, so make sure you get the correct riser kit. The others will not have the right upper arm guide. It will allow you 12" cutting height, which is good for bowl blanks, and it will then use a 105" blade instead of a 93" blade.
I have used many different make 14" bandsaws over the years, from Powermatic, Jet, Delta, generic Tiwainese, and I have an 18" Jet in my shop as well, and this G0555LX is the smoothest, most accurate 14" saw I have ever used. It has the best blade detensioning system I have seen on a 14" class saw.
Last edited by Roger Chandler; 08-17-2016 at 7:44 AM.
Remember, in a moments time, everything can change!
Vision - not just seeing what is, but seeing what can be!