Has anybody done any modifications that they are proud of or found useful? I intend on adding an ammeter if not already installed. I have some LED strip lighting sitting on the shelf that may go nicely inside the cabinet. Maybe a digital thermometer on the in and outflow of the water circuit for curiosity sake. Maybe a beer holder. I would hate to spill my beer on my laser .[/QUOTE]
Hi Scott - Like David and I imagine quite a few others, I added LED lighting - but rather than mount it on the lid or elsewhere I stuck it to the bottom of the gantry rail where it brilliantly illuminates whatever I am actually working on - I intend to wire it in more properly (eventually) but for now it works just having a 12 volt supply with the feed wire running in the gap between the frame and the honeycomb table.
.LEDOff.JPGLEDOn.JPGTempWire.JPG
Bill Carruthers, Rarotonga, Cook Islands
Shenhui G350- 60W; + Hengchunyuan 1300x900 100W EFR , CNC router 40x60, Lightburn fan, RDCam , Coreldraw 12, Photograv 3, Scroll saw, and not enough time to play with all of them!