forced to upgrade from X5 to X8 and I have to say there are things that I don't like.
Closing a drawing changed because they removed the closed button [X] from the drawing window. I keep hitting the [x] at the top but that closes
the program. I use a custom page and set the rulers up in the customization page but it doesn't save it. New drawing, default rulers.
When fitting text to a bottom curve, the letters overlap and jumbo up unless i set the spacing between letters to 60% or more. It use to work at 0% although I
usually set it to 30% so it wouldn't be crowded. I'm sure there are other bugs but these are the ones I run into on a daily basis.
Laser: ULS M300-50 watts, ULS X25-75 watt, Chinese 100 and 150 watt
Software: Corel Draw, Corel PhotoPaint X8, Aspire, MasterCam, Fusion 360
CNC: Rockler 60th Anniversary Edition CNC Shark, EZ-Route CNC
Kingsley Hot Stamp machine
"Out of my mind....Back in 5 minutes"