Dave I'm fairly new to woodworking. And I'm using the Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" and I'm making drawers using baltic birch plywood. Would explane to to how to make a scoring cut on the table saw before you run the sides through the router table. And can you make a templates of this?
"A hen is only an egg's way of making another egg".
– Samuel Butler
See the current Woodmsith, vol. 37, No. 222, pp. 12-13, for a how-to-do-it article on setting up drawer lock bits for both lipped and non-lipped drawers.
I use a cutting gauge to score cross grain before running the parts:
Here's one at Lee Valley - item A: http://www.leevalley.com/en/wood/pag...36,42948,50263
"This should help......<br>
<br>
< a href="http://www.woodshopdemos.com/cmtdrw1.htm" target="_blank">http://www.woodshopdemos.com/cmtdrw1.htm</a><br>
<br>
I would also say bookmark his site, it is great and there is so much information there. John Lucas is a member of the Creek and gives great feedback on post."
Unfortunately, John Lucas passed away a few years ago. It used to be on the web site. I think you can still purchase a cd of all the info he has for around $18 if there are any left. He put out a lot of good info!
Bob