Hey there everyone, I hope your week is going well.
I have some nice heavily spalted maple that I plan on using for a table top. It's very soft but beautiful, which is why I want to use it as a tabletop. I have seen videos that show the use of an epoxy to soak into the soft fibers. I guess the softer it is, the more it penetrates which is perfect. My problem is that the videos I have seen them do it in fail to mention what epoxy they are using. It is obviously much thinner than the epoxy I have on hand that I use for repairs & such. And it needs to be in order to be able to pour it on and squeegee it all over and have it soak deep down into the fibers. I have no doubt that many of you have used these products, and so once again I ask for some of your wisdom & experience to aid me in becoming a better woodworker.