After I sold my Unisaw so quick I had to move fast. I was able to buy my new Sawstop PCS over the phone from Rockler in beautiful tax free Salem, NH. I saved on the big time $250 shipping charges by picking it up myself, too. They were over the top helpful, loading it in my pickup with a fancy pallet jack that is able to lift 4 ft. high.
The specs:
- Sawstop PCS 3hp w/ 36" fence
- Moblie Base
- Sliding Crosscut Table (out of stock but in transit)
- Dado brake cartridge
- Dado zero clearance insert
- Extra brake cartridge for regular blade
- Bonus free Overarm Dust Collection system
Fit perfectly in the back of my Ridgeline with the fence rails, rest of the stuff fit in the back seat.
When I got home, I unpacked the main crate in the truck to lighten the load, then with 2 ea 8 ft ramps that I covered with 2 x 8 sheet of luan plywood, I laid it on it's back side and let it slide down the ramps with (limited) help from my wife, Gawd bless her.. Then at the bottom of the ramps with it upside down, I mounted the wheels and rolled it easily into the shop. I'll finish setting her up tonight!
16658388138_19918ae9bf_z.jpg16649754528_25ca7c47c5.jpg16836987861_143cb003a6.jpg