Hi Everyone
I ordered WS' tool bar and Tormek's Multi-Jig. First the items are designed for turning tools so the guides that come with the jigs are designed for angles steeper than 20 degrees. But, if you are handy enough to make your own set up guide, this seems to work really well for sharpening carving tools.
I tried it out with an old Addis gouge that was as sharp as a spoon. I was able to regrind the tool and hone it to 1200 grit paper on the WS3000. A few strokes on a strop and it was cutting wood like a new Pfeil gouge.
Thought I would pass along this option for anyone having trouble maintaining thier angles while sharpening free hand, like me
Regards
George