Hi everyone,
We have had a blissful start to using our laser but now we are having issues. The mA meter on the top of the machine when working at 20mm and 90% use to bounce around in the 30-40 mark. Now it is no longer cutting through the leather when cutting it is only sitting around the 6 - 8 mA mark when running. It does not work when scanning at all we were scanning at 100 and 15% but in the last couple of weeks had to up it to 30% and now is not scanning at all. Here is what we have done to try rectify the problem.
We have emptyed and refilled our C5200 chiller
Checked the mirrors
Changed the lens
Checked the gorunding wire
Its broken down at one of the worst times my hubby is about to go away and I am flat out. Any help would really be appreciated.
Please HELP!
Bec