I am trying to decide which black paint to use for my basement bar base cabinets. They are newly built from Red oak ply and dimensional red oak. I know I shouldnt paint them, but if you were going to paint them...
I will be using a brush and mohair roller to apply paint. Sanding in between all coats. I am priming with SW All Surface Enamel oil primer. I cannot use some products because they can't make them in black. I am trying to decide between SW Pro Industrial Pre-catalyzed waterbased epoxy or BM Satin Impervo Alkyd Low Lustre.
Epoxy is water clean up and hard, but has to be tinted black. Impervo comes black from the factory so it may go on in less coats but solvent cleanup.
Am I missing something or should I be using something else? Insides and shelves will all be painted with the same paint.