Hi, are there any Machines out there that have converted to the Testra system.? This is the email I received from them. Our controls will work great with the Chinese Laser system. You may even use the
Universal printer driver if you want, as it is fully compatible.
The cost for a conversion kit is $1995. This includes unlimited consulting over the Internet
using remote desktop to assist you in getting everything running.
One thing that I would need to know is what motors are being used on your system. Some of the Chinese systems use 3 phase motors. Our controller will not run these motors directly, only 2 phase motors. If they are 3-phase we can either use the existing stepper drivers in your machine which will not perform as well (about like they do now) or the motors can be changed for a slight additional cost.
There are a lot of variations in the Chinese machines. You might send me a bunch of photos of the machine so I would have a better idea. If you can get a picture of the motors and the label on them I may be able figure it out right away.
Testra built the controls for ULS for many years and have thousands of them in the field. We have many systems installed as conversions, upgrades or OEM Laser System. I have attached a
flyer on the ssLASER-KIT. If your machine has the Leetro controller, we also have a smaller panel which is a direct mechanical replacement.
I am looking forward to working with you on this.
Have a Great Day!