I need another formula. This time I'm making a splayed shop stool. Here's a 2D graphic of what it will look like (loosely).
The legs are splayed 10° out BOTH directions. The legs are also tapered; 5" wide at the top and 2" wide at the bottom. The height of this stool (not including the seat) will be 23". I want to make one compound cut at the top and bottom of each leg to achieve the 10° splay and also have the ends of the legs parallel with the floor. Each of the 4 legs will be "L"s with the ends. I'll make the ends 3/4" narrower so the "L" is symmetrical. (All material is 3/4" thick)
How is this figured?
Also, since the legs are tapered, what would be the angle of the rail ends where they meet the inside of the legs?
Thanks, Todd.