-
I was taught to use sandpaper like someone else was paying for it. I still use it til it's worn because, well, I'm paying for it.
-
So do you think I can re-sand with no more than220 grit and try to stain again? All I have stained so far is scrap pieces.
-
You can sand the solid wood until the cows come home. Be careful with the plywood. They make the veneers pretty thin these days.
-
Leo I know about the ply,you have to very careful not to sand through. I just tried using some Minwax stain with poly in it. This gave me the look I was after. I think two Coates of this with light sanding between then a coat or two of poly will do the trick!
-
-
-
It's just hard to get a nice even color in the finish with this. Nothing really wrong with the product. I've never been able to get it to come out that way I liked. Could be me.
-
I hope it works well, I'll know more tomorrow.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules