Hey guys,
I know there are some processes out there that take a wood part, put them under vacuum, and introduce some sort of solvent / epoxy mix... The point being to impregnate the wood with some kind of product that when cured is much stronger than the original wood. The point being to have the natural look of wood with the properties of a uniform plastic.
Can anyone put me in the right direction for finding a place that does this sort of thing? Or maybe some alternative for home shop use?
Here's a photo of the object in question. The material is about 1/4" x 1/4" cross section and it will be seeing some bending in normal use. I'd like to coat it with polyurethane or lacquer when finished.
223966_432848313427501_2096045527_n.jpg
Thanks all
Luke