I've been working on organizing my shop. The latest is a chisel rack. I blatantly copied one from Bob Easton's blog http://www.bob-easton.com/blog/?s=chisel+rack which he got from a carvers forum.
Well I say I copied but I made a couple of changes. I used straight stock for the lower support and I dovetailed both the front and back supports to the side pieces. The rack lifts off of the french cleat and can be moved to the workbench. It is quite stable. A fun little project to get some of the chisels out of a drawer. I need to make at least 1 more rack.
P1110096.JPGP1110099.JPG P1110101.JPG