I have both a Powermatic 141 and Powermatic 143. The 141 has a Kreg fence installed but the 143 has none. The Kreg system seems less than ideal. Do any of your know of another manufacturer of fences for the bandsaws? Thank you.
I have both a Powermatic 141 and Powermatic 143. The 141 has a Kreg fence installed but the 143 has none. The Kreg system seems less than ideal. Do any of your know of another manufacturer of fences for the bandsaws? Thank you.
I had a Kreg on my 141 for yrs w/no problems and very happy with it until I purchase an original from Van.Just wanted the right vintage is all----Carroll
You might look at the EZ square from Peachtree. It isn't very pretty to look at but is pretty robust, connects on a front and rear rail. It allows for easy connection of a tall auxillary fence (but then so does the Kreg).
The best fence for a bandsaw is the Laguna Driftmaster, there just isn't anything lese in its class. It is expensive and on the heavy end for a 14" saw though.
I wonder if there is anything defective about your fence, I haven't heard of many people that don't like their Kreg.
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
Wondering if anyone might have a lead or any info on obtaining the original fence set up for Powermatic 143. It's a green one from the 70s.
Thanks
You should have about six e-mail attachments with all the 141/143 pdf files including part numbers. Good luck on your quest.
Thanks again!
let the hunt begin...
I think I may have an original fence from a 141 from the early 60's. Anyone have a picture so I will know for sure it is the correct fence.
Bobby,
Did you ever get a response to your question about the 141 fence? Here is a link to a diagram on what a powermatic 141/143 fence should look.
http://www.ereplacementparts.com/pow...04_173284.html143_WW_5.gif