Thats a whole different bird Bryan, the earlier 4.6 and 5.4 litre fords had very shallow thread depth, there were alot of cases of plugs blowing out of the head. I dont percieve this as an installation problem, just luck of the draw. I have seen plugs blow out of the head that were in there for over 100k, and some that blew out at 15k. There is a different repair procedure for this type of problem, we have a kit that installs a heavy duty heli-coil type insert into the head. I can do one in about 15 minutes (depending on the cylinder) it is a permanent repair. There again, for the amount of these engines on the road, compared to the ones that have problems.....yes it happens, not ALL the time.
A bus station is where a bus stops. A train station is where a train stops. My desk is a work station.
I forgot how many times I broke plugs as I were removing them but when I broke one being install, I were told about one case of the mechanic breaking the plugs and had to pull the head in order to remove the remains of the plugs, this happen before 1978 so the mistake of the breaks are not new
The ones that left the factory early in the year had the issue. When I called repair shops to get a price they did not even have to look it up. They knew the cost by heart. Every time I go to the auto parts store to get a filter or something they say "Put a new engine in it yet" I went to the Ford dealer to look at new trucks and soon as I opened my door the salesman said "Put a new engine in it yet" Went to the junk yard the other day to get a spare tire. The guy at the counter said they have calls all the time for 1997 V6 4.2L.
I had the coolant problem the day I drove it off the lot "NEW" Had it back to the dealer many times but nothing they did corrected it. I don't put a lot of miles on my truck so it took me 12 years to hit the 70K miles when they tend to go. To this day everyone I ask in the auto repair bizz knows of the problem except FORD service. They act like they never heard of it before. (Guess they should ask the sales man out front that asked me if I replaced the engine yet) My truck was never recalled.
Lady at work had ,I believe, the same year Toyoda truck that had the frame rust problem. Her truck was worn out but they just gave her $7,000 to buy it back. I love my Ford truck, May even buy a new one. But after this I will go and check out a Toyoda truck first and see what they have to offer.
http://www.complaints.com/directory/...uary/30/23.htm
Last edited by Dave Lehnert; 03-02-2012 at 9:55 PM.
"Remember back in the day, when things were made by hand, and people took pride in their work?"
- Rick Dale
I have an 2004 F150, but only 46K miles, I don't plan on checking them or replacing them anytime soon. I have heard that too and have read a lot about the plugs either breaking or when removing they break. Some say to work them back and forth slowly to clean the carbon off the threads.
My buddy's 2005 F150 about 80K miles, had one break off while driving and ripped up the cylinder, he already had his new 2010 F150 on order and was due in the following week. Unfortunately, they deducted like 3-4K off the trade in, since thats what it was going to cost to fix the motor....he was bummed, but loves his new truck. A mechanic there already had a 5.4L motor and bought it as is.
Last edited by Dave Wagner; 03-02-2012 at 9:53 PM.
Dave W. -
Restoring an 1890 Victorian
Cuba, NY
Jeff, is this the one? http://www.amazon.com/Time-Sert-Trit.../dp/B0038B325I
Very similar to the one we have, ours came with a really nice video demonstrating proper use of the tool. Ours has a TDC indicator as this is very important when you are removing that much material from the cylinder head, (the shavings must be properly extracted). Let me do some looking for a site that carries the one we have, I like mine a little better than the one you have linked to and it was at least $75.00 less money.
A bus station is where a bus stops. A train station is where a train stops. My desk is a work station.
Greg, here is the one I recemmond http://www.amazon.com/Ford-Spark-Plu.../dp/B0013HE2YO
A bus station is where a bus stops. A train station is where a train stops. My desk is a work station.
Thanks Jeff!