I'm near completion of the 3" T&G oak floor in my shop. I love it, and am now worried I'll screw-up by using the wrong finish. Here are some options I'm considering:
1. Shellac SealCoat followed by Oil-based poly
2. Shellac SealCoat followed by Water-based poly
3. 3 coats of Waterlox low-VOC
I've used oil-based poly on other floors in my house, but am thinking that a skin-type finish would not be very repairable for the shop. The Waterlox is repairable, but they only sell the low VOC version in my state, and it's expensive and relatively new and untested.
Are there opinions on these or other options I should be considering?
Thanks,
Bob