I have a G0690 table saw and am looking for an after-market rig that I can attach to my saw that will allow me to make accurate cuts/dados across long/narrow sheet goods. I'm building 96" tall cabinets, typically with 12-15" deep sides...so the stock will be 12-15" wide and 96" long. I need to be able to crosscut accurate dados and rabbets. I'm currently doing this with a hand held router and a straight edge, which works but setup time is unacceptable for production work. I need a rig that will hold the stock square to the blade and support the long end with a telescopic feature. Does it exist?
Darn, should have bought a slider in the first place!
thanks