Hi everyone,
I made this shaving horse from a plan in the early 80's. I used pallet wood which was oak and I made a few chairs with it over the years. Well Brian Boggs featured his shaving horse not too long ago in FWW magazine (no. 139,p. 122) and I finally got around to sooping my mine up as well. It all got started when I bought some rawhide on the internet months ago and I wanted some better holding power for shaping Windsor chair spindles. Sorry about the photos couldn't get them vertical.
Jim
shaving horse 4.jpgphoto.jpgshaving horse 1.jpgshaving horse 3.jpg