I have some 3/8" resawn mohogany stock that I need to plane to 1/4" for the "pigeon holes" in a small antique desk I'm restoring. I have seen a thread on one of the forums regarding using a "host board" or carrier stock to attach the thin stock to, but can't seem to find it anywhere. I totally understand the concept, but need help with attaching the two pieces of wood so I can avoid having them separate under the knives, yet be able to separate them once I reach the thickness I need. Someone mentioned a temporary spray adhesive and another mentioned double-sided tape. I'd like to know what experiences you've had - both successes and failures, and which way I should go......Thanks, Butch.