Well I finally was able to give the monster rig from Randy P. a try.
All in all things went quite well for this first go. Except for not setting the laser correctly near the bottom and got just a tad thin in the wall.
Keen eyes will see the speck of light coming through...
IMG_0686.jpg
Other than that I was quite happy how this first one turned out.
Simple form of walnut 3.5X3. And not a lot of time spent of finishing as this one will sit by my lathe to be little reminder....
Next will be to try and have a smaller entry hole
IMG_0688.jpgIMG_0692.jpg
I have to say that rig from Randy sure makes the learning curve on hollowing quite short. Sweet tool. Thanks again Randy.
.