Hello, I put up a new shop a year ago and have decided I need to get something over the concrete floor for a little cushion and to help keep the shop warmer in the winter. I wanted to to do a floor with sleepers and osb/plywood on top but the build up in height will be to high for my doors. I have been looking at the Dri Core panels (2x2) as these look like they will work fine but a little more $$, but easier to put down. I was wondering if anyone has used these for their wood shop floor "as is" as their final floor. No covering at all. Big Box store says you can, but just add a few Tapcons here and there to help prevent any movement. He also said you can add poly or floor paint on top to finish. Anythought on this? I might be able to add a laminant floor on to later (when I have more $$) if I have enough room under the doors after the dricore. Thanks
Todd