Folks, for some of you I hope this is a basic question cause that means you can give me some good advise but for me this isa frustration. Current situation:
1. I am finishing a European Beech table - top is 65x33.
2. I stained the top with General's Java gel stain.
3. I finished it with General's oil and polyurethane satin.
4. No matter how hard I try I cannot get rid of scattered dust particles hitting the top.
5. General says to rub out with 4/0 steel wool or sand with 320 between coats - I have used 320 between coats.
6. I have been under the impression that you should rub out the last coat with 4/0 and wax, but General says not to rub out the last coat.
Question - how do you get rid of the little bumps caused by the dust? And is it general practice to rub out the last coat?
Help! I have a table to deliver by Wednesday for my son's wedding and I gotta get this last coat done today!