A follow-up from my in-progress thread earlier on a desk for my father, some updated photos.
The finish is transtint dye (dark mission) follow by about 5 coats of waterlox, 4 base being semi-gloss then 2 coats of satin on top.
The sides are figured oak, framing is QSWO, and the top is white oak burl framed in QSWO with a 1/8" thick walnut inlay between the burl center and oak frame.
I need to work on taking better pictures, but with a piece so large it is difficult to get good shots encompassing the entire project. From wing to wing point is is about 10' and assembled takes up a huge area in the shop, so moving around to get perspective for pictures isn't feasible from most angles. I hope to have some more pictures which are better when I deliver/install it this weekend.