Results 1 to 11 of 11

Thread: Captive Monster?

  1. #1

    Captive Monster?

    I'm looking at the hollowing systems out there. I have been using my neighbors Bosch bars and I like them. But I have had several catchs and was looking at the monster captive system for $500. Should I just purchase the Bosch or pay more and get the monster? Thanks

  2. #2
    if you like the monster but are not thrilled with the $500, take a look at the elbo tool

    invented by Stan Townsend of Tulsa Ok,

    http://www.elbotool.com

    i believe it preceded the monster, and it did not cost $500

  3. #3
    I have done a bit of hand hollowing and find that some sort of captive system is the way to go particularly when a laser is also employed.

    Depending on the depth that you want to hollow you can go with the Monster Articulated Hollowing Rig. It is a bit cheaper than the standard captive rig. I have the articulated rig and it will do 99% of the stuff that I like to do.

    The Jamieson system is cheaper than the monster and works very well. Or if you or a friend does any metal fabrication a captive rig is pretty easy to build. Lyle Jamieson even has instructions on his web site.

    Good Luck

    Alan

  4. #4
    I also just saw that the Pro Form is on clearance at craft supply. Should I be interested in those?

  5. #5
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    I have both the monster articulating arm and the monster captured unit. I love both of them but if I only could have one it would be the articulating arm unit. When you buy it it is complete and don't have to buy extra's. Easy to use and doesn't beat me up like hand held units do.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  6. #6
    Join Date
    Jan 2006
    Location
    North central Pa Tioga Co.
    Posts
    701

    monster system

    What Bernie said!!! G

  7. #7
    Join Date
    Oct 2006
    Location
    Harvey, Michigan
    Posts
    20,811
    I have both of the Monster systems and love them! Use the captured system to get the form roughed out and close to finishing, then use articulated for all the finishing cuts. There are a number of systems out there and they are not cheap! So do your homework and find which system will do what you want now but also be there with you as your skills progress.
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  8. #8
    kevin, i know it's not a system you asked about, but i too have the jamieson with laser. for me, it works very well; while it is a little, and i say a little 'wiggly', with some of the material being tubular and the main arm is joined to the laser upright with (albeit) heavy plastic 'joints', it's still plastic. but i like it, and wasn't too costly. always a factor!

  9. #9
    Join Date
    Nov 2006
    Location
    Southwest Missouri
    Posts
    185

    Question for Steve Schlumpf

    Quote Originally Posted by Steve Schlumpf View Post
    I have both of the Monster systems and love them! Use the captured system to get the form roughed out and close to finishing, then use articulated for all the finishing cuts. There are a number of systems out there and they are not cheap! So do your homework and find which system will do what you want now but also be there with you as your skills progress.

    Steve,

    I am interested in a hollowing system and have been looking at both the Jamieson and the Monster systems. Would you please elaborate as to why you chose both of the Monster systems. Do you favor one over the other. Given your experience with the systems now, would you have done anything different then? What is the size range of your systems? Any words of wisdom with regard to hollowing systems would be appreciated.

    Anyone else with experience with these systems please chime in.

    Thanks in advance.

    George Clark

  10. #10
    Monster is sweet. Whether you get the captured or articulated rig, get the hand held handle with it. That way you can use all of the tooling in a hand held setup if you need or want to. Best of both worlds.
    David DeCristoforo

  11. #11
    Join Date
    May 2010
    Location
    Lewisville, NC
    Posts
    267
    Blog Entries
    2

    Hollowing

    Buy the best. Usually the most expensive. My philosophy is if you can stretch to get the best. You won't regret it. Fortunately a cranky wannabe lathe, same with wannabe tools is far in my past. It is an absolute pleasure to create hollow forms or whatever in any size and not reach the limitations of the lathe or tools. I consider myself very blessed in this regard. I truly did my apprenticeship on wannabe stuff and actually learned a lot. When I was fortunate to purchase the good stuff my turning took a quantun leap as I was then able to execute the vision without being limited by marginal equipment.
    David Woodruff

    If you don't know where you're going, it doesn't matter how you get there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •