Hi all,
I'm planning on epoxying my concrete floor in a couple of weeks and have some questions:
I bought the Rustoleum 2 gallon 2 part solvent based epoxy floor coating # 203373. I am going to use the flakes, but was also thinking about using the anti-skid additive (8oz).
I spoke to Rustoleum technical support and they said to use one package for each gallon, which means adding 2-8oz packages of the anti-skid to the 2 gallons.
Is this too much? Should I use just one or do the flakes give enough friction by themselves?
I attached some pix: the first floor - is where I will be painting the concrete. The second floor is going to be used for finishing/storage and there is a 4'x6' opening in the floor to be able to bring things upstairs.
The pix are showing the finished insulation, which I did myself. The drywall is currently being put up now and should be done and painted in 1-2 weeks. Then the painting begins!!!
Oh and by the way the size of the shop is 16' wide by 20' deep.
Thanks for your advice,
Ed