Anyone here using a Phase Perfect Digital Phase converter?
http://www.phaseperfect.com/products.htm
I have been reading about them, and spoke to them on the phone today..
They sound fantastic.
They gave me some names of some users.. one is actually in the same little town as me..
Its basically a 120lb blue box which draws 100 watts.. it makes the sound of a fan running.. From a 60-70 amp 220V PH1 breaker.. it will actually run a 10HP PH3 motor..
It takes 8 seconds to "power up" when turned on, and even when running at full capacity, it doesnt drop voltage.. less than 1%. Compare that to a Rotary, making a racket .. using up about 8 amps on its own and dropping up to 25 volts when maxed out..
It sounds "perfect".... The only downside is that they are expensive .. lol..