Hey Tim,
Our prayers are with you also and I firmly believe that when one door closes, God will open another. We just have to be patient sometimes. My brother got let go, Dec 08, from from the IT dept in R & D at Exxon who had the highest profit last year. But R & D is slow now. So he's been applying and interviewing in between his fishing just about very weekend in the Texas gulf coast and filling up his freezer. Well he just landed a job last Friday with the largest container shipping company. It is closer to his home and he can go back roads and get there in 15 minutes instead of fighting the traffic jams into town and with very little pay cut but he said he will save almost 1 1/2 hours a day driving so that more than makes up for it. So there is hope but you may have to move down hear to Texas and if you don't mind, please pick Amarillo if you like it cooler in the winter or if you like it HOT, pick El Paso or South Padre so that you have somewhat uncharted territory and because there are already too many laser heads in the Houston area already to compete with. Just Kidding, there's plenty of room here.
Come on down and ...
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=