I've been thinking about moving to a router table extension in my table saw to save shop floor space. But I have a few questions holding me back.
1) I absolutely love my Woodpeckers cast aluminum router plate and REALLY do not want to give it up to move to something such as the Bench Dog Router Table Extension. Are there any other router table extensions available that would accommodate a Woodpeckers cast aluminum router plate, which is 9-1/4 x 11-3/4 x 3/8 thick?
Woodpeckers has one, but it appears as though it's made for a saw with the Incra fence system installed. I could get them to make me a custom one, but I wanted to see if there were any other manufacturers with "off-the-shelf" models first.
2) I also really like my Woodpeckers Super Fence. I've noticed that not all the router table extensions have fence slots, so I wouldn't be able to use my Super Fence. And if they do, they're too far apart to use with my Super Fence. I figure the manufacturers assume you'll be using your TS fence... I can't imagine being without the split fence and DC hookup of my Super Fence.
So what do you all do for a fence? Use your TS fence exclusively? Have an extension that supports a RT fence?
Thanks!
Paul